ZERO RUST PREP STEP--1.5 lbs

Prep-Step Powder mixing:

Dissolved in water at 2% or more, when used prior to painting metal surfaces. Prep Step promotes paint adhesion and endurance.

Prep-Step is Not an acid, therefore flash rust development of the substrate is abated for a significant amount of time depending on temperature and humidity (normally 30 days). Prep-Step changes the molecular structure, phosphatizing the surface, adjusting the pH to -6, both conditions resulting in greater paint performance.

Pre-Step can also be used as a degreaser, applied by either pump-up sprayer or power washing. This solution helps to loosen and remove rust when wired-brushed while wet by hand or mechanically.

THE SURFACE SHOULD THEN BE RINSED THOROUGHLY TO REMOVE LOOSE RUST AND OTHER CONTAININANTS.

After cleaning as above, 2 % solution of Prep-Step in water sprayed onto surface; left to dry COMPLETELY; and then with NO RINSING can be painted with long-lasting results.

MIXING PREP-STEP:

For heavily rusted surfaces prior to wire brushing or scraping:

1/3 bottle (4 oz.) in 1.5 Quarts of water

1/2 bottle (6oz.) in ½ Gallon water

FOR “CONDITIONING” CLEAN METAL SURAFCES WITHIN 30 DAYS OF PAINTING:

1/2 bottle(6 oz) in 3.5 gallons of water

POWER WASHING(Recommended 3000 to 4000 psi)

1/2 oz. bottle to 10 Gallons

1 – 12oz. bottle to 10 gallons of water